ccna test preparation

ccna test preparation

There are four metric types: Router-id 1.1.1.1 If the link or node fails, the traffic will be rerouted due to the failure. If the rerouting takes a few seconds, the high performance of the link will cause a large amount of traffic pointing to the fault point to be discarded. For some businesses, business interruption may result. Let's look at an example: Global Pool Sub Pool Test the transmission process of the data stream, observe the phenomenon !! Path error message sent by R2 to R1 Fa0/0 RSVP message type The default MaxAge is 1200 seconds and ZeroAgeLifetime is 60 seconds. When the serial number of the LSP sent by an IS reaches Mpls traffic-eng router-id loopback0 mpls traffic-eng area 0 Ip address 3.3.3.3 255.255.255.255 No mpls ip propagate-ttl [ forwarded | local ] R2 RFC 3277 Maximum reservable bandwidth information: 10.1.45.0/24 R2#sh mpls tr link-management advertisements Mpls traffic-eng tunnels mpls label range 200 299 Interface Tunnel0 Remote binding: tsr: 2.2.2.2:0, tag: imp-null tib entry: 10.1.13.0/24, rev 8(no route) Will affect the VPN traffic. Interface loopback0 0 kbits/sec Mpls traffic-eng tunnels ip rsvp bandwidth !! The type of IS is level1 *Aug 18 09:06:07.919: version=0 length in words=10 Suppose we have now established a TE tunnel with R2 at the head end and R5 at the end ,ccna test preparation, which will generate a tunnel interface in the R2 local routing table . Then the simplest method is to direct the traffic of the upper tunnel to the tunnel interface with a static route . For example, after the following configuration is completed, the traffic from R1 and R2 to 55.55.55.0/24 will go from the TE tunnel .