ccna number of questions

ccna number of questions

Integrated IS-IS ( IS-IS ) enables the IS-IS protocol to propagate routing information for protocols other than CLNP . R3#show ip cef exact-route 10.1.35.55 1.1.1.1 Circuit circuit Local binding: tag: 104 The above is the LDP neighbor shown on R1 . There is an LDP neighbor. Its LDP router ID is 2.2.2.2 and label spaceID=0 . This indicates that the platform is based on the label space. R3.00-00 AutoRoute: disabled LockDown: disabled Loadshare: 33000 auto-bw: disabled Router isis Network 10.1.12.2 0.0.0.0 area 0 Contains the tunnel's prioritization, hold priority, and some flags *Aug 18 11:26:02.546: IS-IS metric Interface Loopback0 Next , take a look at the Tunnel on R2 : 0 kbits/sec Metric: 10 The load of the routing processor is low in large areas 1178 R1 , R2 , R3 , and R4 run the LDP protocol. The configuration of R3 is as follows: In general, a IS-IS process, only one NET , you can of course also a IS-IS assign multiple processes areaID different NET address, pay attention to these NET addresses SystemID must be the same. This way the router can connect to multiple zones,ccna number of questions, which is great when we need to merge different zones into one zone. Generally, a Level1 router participates in the flooding of L1 LSPs only in the area to which it is connected . If this router is connected to multiple areas, flooding of L1 LSPs in multiple areas can be achieved , thus completing effective area consolidation. .