ccna security vce

ccna security vce

!! Let R1 generate a packet with a message size of 1500 and send it to R4. ! S 172.16.3.0/24 [1/0] via 172.16.23.3 :: 0 00:19:44 The configuration of R1 is as follows: Address-family ipv6 neighbor 2.2.2.2 activate Unassigned Difficult case None Ip route 192.168.1.0 255.255.255.0 172.16.12.1 Ipv6 unicast-routing ( Routing Table ) , the routing table is loaded with routing entries ( routes ) learned by the router . The routing entries are composed of routing prefixes (destinations associated with routes), routing information sources, outgoing interfaces,ccna security vce, or next hop IPs . The router obtains routing entries and maintains its own routing table in a static or dynamic manner. ! Each RIP message contains routing entries, up to 25 , and more than one message is required. Let's look at the above example. For an IPv6 single-protocol network, first of all, it has the need to access the IPv6 Internet. Therefore, the default IPv6 traffic is all handed over to R1 . In addition, it may have the need to access the IPv4 Internet. In this case, it is necessary. by R2 this NAT-PT device. This NAT-PT device must first be a dual stack, and secondly it can convert traffic from an IPv6 network into IPv4 traffic and put it into a V4 network, and vice versa.