ccna dump questions download

ccna dump questions download

00 Ip sla monitor schedule 1 life forever start-time now RIP Version 2 Protocol Analysis X Configure OSPF unicast updates: tie. When B accesses the IPv6 network,ccna dump questions download, the IPv6 address can be taken from the pool . In addition, in order to allow V4 network access V6 network has goals, but also made a static mapping, the 2001: 1 :: 1 mapped to 202.101.100.111 , so, B will be able to use 202.101.100.111 This IP to access IPv6 hosts A . After the trigger update is enabled, the routers at both ends of the link no longer send routing updates periodically. Of course, another problem arises. If the route in the routing table expires, it will hang, so it is necessary to trigger the update. It must be configured on both interfaces of the link, so that the routing update will be marked permanent for permanent. Application layer gateway ALG Image R2(config)# router eigrp 100 This global configuration command enables PBR to take effect on locally originated traffic. Establish BGP4+ neighbor relationships and pass IPv6 routes using IPv6 Linklocal addresses . The destination IP address of the route , which can be the address of the natural network segment or the subnet address or Associate the IPv6 network allowed by the ACL with this v6v4 address pool. Abbreviation of IPv6 address Length, or mask length. When paired with the above ACL , some students will even write Image The intranet has a network segment, 192.168.10.0/24 , which is the server network segment. Static NAT mapping is deployed on OR1 , and the specific server is mapped to the exit of OR1 . In this way, Netcom users can access the external network. Access to these server resources. But the problem is that the external network users of the telecom cannot access these server resources through the mapped external network address.