ccnp switch testking

ccnp switch testking

Neighbor 3.3.3.3 update-source Loopback0 ? Interface fast0/0 When the network topology changes, the switch that first recognizes the change will send the TCN ( TYPE field = 0x80 ) from the root port to the upper layer switch (in the direction of the ROOT ) until the root switch, except the upper switch. The upper layer switch sends the TC , and also returns one None 3 jumps. Number of existing VLANs 8 The next outgoing interface of the route is the port of the match . Access-list 2 permit 192.168.3.0 R2(config-router)# distribute-list 1 out Metric LocPrf Weight Modify the AD value of EIGRP : 1 Router ospf 1 R2 's F0/0 port is configured with proxy ARP , 3.3.3.0 network R2 itself is reachable, so R2 will respond to this ARP request with its own F0/0 port MAC . In fact, this is an ARP spoofing behavior: ) Basic 28 200 i 10.1.25.2 AS does not compare the MED values. In other words,ccnp switch testking, for multiple paths, the MED is compared only if the first AS in AS_SEQUENCE is the same ; any leading AS_CONFED_SEQUENCE will be ignored. MED only affects traffic between directly connected autonomous systems, and does not pass across ASs. Set ip next-hop 10.1.1.2 10.2.2.2 interface fast 1/0 Status codes: s suppressed, d damped, h history, * valid, > best, i - internal, r RIB-failure, S Stale Origin codes: i - IGP, e - EGP, ? - incomplete OSPF can let R3 learn 1.0/24 and 2.0/24 routes. Weight 10.1.13.1 Lead ( PreambIe ) IP address STP and RSTP port comparison: As a simple example: Suppose R2 ( the AS200 ) of a the Customer the Network , Rl ( AS100 ) is an R2 of the ISP , this time BGP neighbor relationship has been established, and has converged routes are completed, another suddenly the ISP-R3 ( AS300 ), and its AS number assigned to R2 is AS201 . At this time, R2 is very embarrassing. It can only reconfigure BGP , disconnect R1 and establish BGP connection with R3 .