ccna version 3 dumps

ccna version 3 dumps

If the above into OSPF , is invalid, i.e., the static route is associated interface, in OSPF the network when the network routing number, and will not be declared into OSPF . 1 In general, the tunnel agent and the dual stack Router belong to the same management party, such as the same company. Because the tunnel agent has the configuration permission of the dual stack Router . Image Interface Serial0/0 ipv6 enable Ip cef LinkID in OSPFv3 still is 32bits of No auto-summary no synchronization exit-address-family Ipv6 nd other-config-flag Router(config-rtr)# distance x 134 OI 2001:1:1::1/128 [110/192] Transition from the old routing protocol to the new routing protocol 1/16 Not advertised to any peer Local Image By default, the RIP running on the CISCO router sends v1 and receives v1 v2 . If the display is declared as v1 ( use the version in the RIP process) Image Neighbor 2001::1 next-hop-self R3 associates the route-map with the redistribution of the direct route 3.3.3.3/32 , tag#11 , and the route is passed to R2 . On R2 , the redistribution of RIP to OSPF is deployed. After the external route of 3.3.3.3 is injected into OSPF , the tag value is carried by default. Access-list 1 permit any route-map PBR permit 10 match ip address 1 Must be zero R1 RIPv1 ! Default Gateway . . . . . . . . . . . . . : fe80::5efe:2.2. 2.2%40 2001: 5555::5/128 PE1#show bgp vpnv6 unicast all 2001:5555::5/128 Network 3.3.3.3 0.0.0.0 area 0 Y IP prefix lookup IPv4 mtrie 8-8-8-8 optimized Input fast flags 0x0, Output fast flags 0x0 ifindex 3(3) Gateway of last resort is 192.168.12.1 to network 0.0.0.0 C 192.168.12.0/24 is directly connected,ccna version 3 dumps, Serial0/0 Address-family ipv6 A standard ACL can only match the route prefix and cannot match the prefix length of the route. For example, if you want to fetch the 192.168.1.0/24 route and use access-list 1 permit 192.168.1.0 , the route is matched, but at the same time, 192.168.1.0/25 , /26 ... are also matched because the ACL cannot match the mask, or the prefix length. Furthermore, when using a standard ACL to fetch routes, it is recommended not to add an anti-mask, otherwise the range of matching route entries will be larger and less accurate.