200-125 cisco certified network associate dumps

200-125 cisco certified network associate dumps

R1#sh ipv6 route ospf Image Interface FastEthernet1/0 ipv6 enable ... partially omitted ... *Mar 1 17:40:49.495: BGP(0): FE80::CE02:8FF:FED8:0 rcv UPDATE w/ attr: nexthop 254.128.0.0, origin i, Interface FastEthernet0/0 ipv6 enable ! OSPF and BGP meaning Image Ipv6 unicast-routing interface Tunnel0 Image Unicast address !! This is the direct link between R1-R3 No bgp default ipv4-unicast neighbor 2.2.2.2 remote-as 234 Enhanced Interior Gateway Routing Protocol (EIGRP) ISO IS-IS Verify again, instead of detailed routing, use a summary route of ip route 10.0.0.0 255.0.0.0 , the next hop is R3 , the effect is the same as above, also take R3 . Therefore, as long as it is not the default route, as long as there is such a matching route in the routing table, the route is taken preferentially, and the route-map is taken without the route . Modify the AD value of EIGRP Address family Image Image Image In IPv6 , it is recommended that all nodes use the PMTUD mechanism to discover the MTU of the link , so there is no need to segment the data. However, if the IPv6 node does not support PMTUD , but must send packets larger than the path MTU , it will have to be segmented. In this case, the segment header is used,200-125 cisco certified network associate dumps, the node segments the data, and each segment is sent using the segment header. Segmentation.