ccna 552q dumps

ccna 552q dumps

Ipv6 ospf 1 area 0 Prefix-delegation pool dhcppool lifetime 1800 600 Image Ip address 2.2.2.2 255.255.255.0 no shutdown Y Neighbor request ( NS ) Use a hold-down timer to prevent routing loops F000 – F7FF Ip address 132.214.1.10 255.255.255.0 204/nolabel Routing? The key point is that R2 , through the R2 deployment redistributed routing , routing information may be selected in different transmission routes between the domains. Frame-relay map ipv6 2000:12::2 102 broadcast Modify the TAG of all external LSAs generated by the ASBR . Access-list 1 deny 192.168.13.0 access-list 1 permit any 101x xxxx xxxx xxxx 32 bits One of the ideal solutions is to transform the network topology: Address resolution ( instead of ARP protocol, using ICMP to complete address resolution ) OSPF can let R3 learn 1.0/24 and 2.0/24 routes. Configuration example IBGP re-advertises routes to OSPF Very thorough analysis of the foregoing, when the RIP to OSPF do two-dot weight when released, since the routing is injected into OSPF later, the AD becomes 110 , then transmitted to the route R2 , R3 Thereafter,ccna 552q dumps, since OSPF the AD than RIP smaller Therefore, the OSPF route will overwrite the RIP , resulting in a sub-optimal path. Then, we can use ACL and other tools to capture the routes in the RIP domain on R2 and R3 , and then adjust the AD values ​​of these routes to be larger than RIP in the OSPF process . Then, these routes are RIP routes will not be overwritten, and suboptimal path problems can be circumvented.