ccnp route chapter 3 exam answers

ccnp route chapter 3 exam answers

Metric // The offset value is increased by the value displayed in the normal route entry. It is added on the original basis instead of replacing the original hop count. [abcd] Ip prefix-list 1 permit 172.16.1.0/24 ip prefix-list 1 permit 172.16.2.0/24 route-map test permit 10 CISCO Note: If the DHCP relay agent is enabled but DHCP snooping is disabled, the DHCP option-82 data insertion feature is not supported. Ip as-path access-list 1 permit _600$ route-map setCommu permit 10 AS_SEQUENCE exactly the same, except that the list of AS numbers belong to the local Federation AS Write multiple commums in the same line, such as ip community-list 1 permit no-export 12:1111 does not take effect,ccnp route chapter 3 exam answers, can not delete these two values The status of STP is as follows: 5.5.5.5 Local-as Configured on the interface, the portfast feature does not have to be implemented and can be implemented independently. Of course, it is recommended to use the portfast feature. Interface f0/1 Packets with destination addresses that do not exist at the beginning of 192.168 are discarded directly. Normal traffic on other subnets of the 192.168 intranet will be forwarded according to the longest matching principle. The preferred principle is IGP > EGP > Incomplete Weight Configuring Example 6 Deploying Distribution Lists When Republishing Between Protocols Policy-list feature CAM is the table that the switch checks when it is used for Layer 2 switching. We will find that when the topology changes, the TCN will be generated . However, in some cases, the transition flooding of the TCN may have an unnecessary impact on the network . The interface connected to the PC terminal device on the access layer switch is set to portfast network can be optimized to a certain extent, prevent the PC interface of the switch due to switch updown and excessive the TCN .