ccnp route kurs

ccnp route kurs

RootGuard Command Neighbor maximum-prefix xx Path cost Interface f0/1 Supplementary explanation of the role of the as_set keyword: ID . OSPFpassive-interface neither sends nor receives routing updates, nor does it send HELLO packets. Sw(config)#vlan 201 Redistribute ospf 1 match external 1 external 2 No-export Both R1 and R2 inject 100.0.1.0 and 100.0.2.0 into BGP using network . We look R5 are BGP table: Set ip next-hop verify-availability Route-map first acquaintance FastEthernet0/0 Switch(config-if)# switchport port-security aging type {absolute | inactivity} Address-family ipv4 unicast Longest match principle 10 We mainly analyze: Marker : for detecting BGP loss of synchronization between peers, the message authentication, and in the case of supporting an authentication function if the message type is open or open message does not contain authentication message flag field is set to all 1 , If the exact-match keyword is not added , the community-list will match the 11 and 12 routes. After adding, it will only match the community. Manually configure a secure address on the trunk interface to associate the vlan keyword. If the security address is manually configured on the trunk interface and the vlan keyword is not associated , the security address will be associated with the native vlan of the trunk . *>i10.1.12.0/24 switchport trunk encapsulation dot1q switchport mode trunk Assigning community 100:11 to route 11.11.11.0/24 on R1 and passing it to R2 , then R1 is configured as follows: R8 to re-advertise 8.8.8.0 into the BGP , has spread to R10 , the R10 on the route AS_PATH is 98? , Interface vlan 100 Feature VLAN: Access Switch SW1 is turned on DHCP Snooping , inserted Option82 ; Solution 2 : The default AD value of the BGP local route ( introduced by the local network ) is 200 , which is larger than the RIP . Therefore, if it is on the R1 , the 2.2.2.0 route learned from the EBGP neighbor (in this case, the EBGP route, AD is 20 ), and at the same time in the local network (becomes a BGP local route),ccnp route kurs, then the AD of this route will become 200 , which is larger than RIP , so RIP routing is preferred at this time . R2 is the same, in the BGP process network 1.1.1.