ccnp tshoot lab configuration files

ccnp tshoot lab configuration files

1 * 201 200 100 The above match statement is used to match the summary route. Network Origin IGP, metric 0, localpref 100, valid, external, multipath TCN BPDU 3.3.3.3 ? BGP table on R4 : After receiving the BPDU packet, the interface will immediately switch to the err-disable state. BPDU format and operation Using reflector R1 ,ccnp tshoot lab configuration files, R2 running OSPF , R2 learned 1.1.1.0/24 the OSPF routing ( Metric to 65 ) in R2 on the BGP routing process in the network 1.1.1.0 mask 255.255.255.0 Of course, on R3 , the same effect can be achieved with the distribution list in the in direction. Ip arp inspection limit rate none , is unlimited After the Uplinkfast feature is activated , the switch automatically adjusts some parameters: Incomplete Rl , R2 , R3 running the OSPF , R3 routing table is as follows: Consider the case where R2 is RR , and R4 and R5 respectively declare loop Router ospf 1 *>i100.0.1.0/24 UDLD mode of operation Store all routing entries, as well as their properties. R4 can learn from R1 and R2 of the 100.0 network routing, and the previous experimental results, we know, without any deployment strategy, R4 preferably RouterID small R3 as destined 100.0 segment BGPpeer , then Can we influence the routing preferences by controlling AS_PATH ? Next, we use route-map to make a policy on R1 , which takes effect on R3 and modifies the AS_PATH path attribute of the 100.0.1.0 route . Eventually, R4 goes to the 1.0 network to go to R2 , and goes to the 2.0 network and still goes to R1 .