ccnp switch 300-115 arabic

ccnp switch 300-115 arabic

192.168.2.0/24 Loopback Loopback interface We look at the above picture, R1 , R2 have issued routes, R3 on these detailed routes are summarized, summarized into 172.16.0.0/16 , summary routes are AFI (Address family identifier) 5.5.5.5 a(bc)?d Switch(config-if)# ip address 192.168.255.1 255.255.255.0 Neighbor 10.1.12.2 remote-as 200 ARP spoofing principle Neighbor 3.3.3.3 peer-group IBGP_peers neighbor 4.4.4.4 peer-group IBGP_peers Tunnel Tunnel interface Port ID SW1(config-if)# switchport nonegotiate For example, the following three types of point-to-point transmission services: Bgp confederation identifier 345 bgp confederation peers 64513 neighbor 3.3.3.3 remote-as 64512 RIP-1 only sends RIPv1 updates !! When the route matching ACL1 when Requires trunk link support between switches Other solutions, we will continue to introduce in the following experiments Distribute-list 1 out Experimental verification Solution 2 : Free arp Experimental example: Calling in the distribution list The penalty value of all normal routes is 0 , and the penalty value is added instantaneously. As shown in the figure on the left, if the PC wants to Telnet the switch, first the PC should be able to ping the switch. Secondly, the VTY should be activated on the switch and the password should be configured. Then we create a VLAN 10 on the Layer 2 switch , assign the F0/1 port to VLAN 10 , and configure an IP address for the logical interface of VLAN 10 of the Layer 2 switch , and the IP of the same network segment as the PC . In this way, the PC can access the switch. But the problem is coming, so that the PC and the switch are on the same network segment and the same VLAN . In case there is a conflict between the IP address configured by the PC and the switch, we can consider dividing the switch into one. Separate VLANs for managing these switches. This VLAN is suitable for the entire traffic network, unified VLAN and unified IP.Planning, it is the management VLAN , so the management VLAN is not a specific VLAN , not VLAN1 , which is a misunderstanding of many people. In general, we will use a more "unprecedented" VLAN ID and IP ,ccnp switch 300-115 arabic, such as VLAN255 in this lab , and the network segment.