ccnp 300-115 price

ccnp 300-115 price

The switches at both ends of the trunk need to use the same trunk protocol. In CEF , there are two main types of load balancing, based on messages and based on purpose. Cc01.043c.0000 (10.1.1.252) In summary, for IBGP to work properly, you must implement one of the following configuration options: *Mar 1 00:11:48.043: ICMP: echo reply rcvd, src 2.2.2.2, dst 192.168.123.3 After 10.30.0 is passed to R3 , since the RIP updated subnet and the R3 interface subnet belong to the same main class network,ccnp 300-115 price, R3 receives the update, and uses the interface mask as the mask of the RIP route, so the R3 routing table The route loaded in is: 10.1.20.0/24 Which exchange method will be used Router bgp 100 300 {100,200}, (aggregated by 300 3.3.3.3) Interface mode, configure the interface as DAI trusted , the default is untrusted Finally: R4#sh ip b Ip route 192.168.1.0 255.255.255.0 172.16.12.1 Experimental verification Configuration example At the same time, if 172.16.1.0 and 172.16.2.0 are all DOWNed at this time , the summary route also disappears. Port Mode Encapsulation Status Native vlan Fa0/20 on 802.1q trunking 1 Dialer Dialer interface RIPng 39 ? parameter *version* 2 The process of processing a VLAN frame by a trunk port is as follows: 192.168.1.0 the OSPF routing but will be re-injected into the RIP (because we deploy a two-way re-release), this is the route Feedback , the route was filling back. Network 3.3.3.3 0.0.0.0 area 0 PS : When the same router has two static routes to the same destination, the outbound interface and the next hop are used respectively. The two routes are load balanced (because the AD value and the metric value are equal). The static route configured by the outbound interface is imported into the routing table as a directly connected network. For details, see the static routing part of this document.