how many questions on the ccna

how many questions on the ccna

Path maintenance Interface Ethernet0/0 Tu0 All routers in the LAN advertise their own connectivity to the pseudonodes in their LSPs (the adjacency relationship between themselves and the pseudonodes) 0/0/0 MPLS TE tunnels, also known as Traffic trucks , are used to overcome hop-by-hop IP routing defects. 11 R2 (config)#router isis Tib entry: 1.1.1.1/32, rev 2 Ip unnumbered loopback 0 Reservable Bandwidth[4]: Network 10.1.23.2 0.0.0.0 area 0 mpls traffic-eng router-id Loopback0 mpls traffic-eng area 0 4 Use default-information originate to associate a route-map to conditional notification. Only when the route-map match is established, the default route will be sent . The associated prefix list can be matched in the route-map to match the specific route prefix. The default route is advertised when there is this route in the R3 routing table. A value of 0 indicates that the maximum number of three area addresses is supported . By default,how many questions on the ccna, the value is 0 , and the actual value is in the range of 1-254 . This global command is used to modify it. After the expiration of the timer, the IGP will establish an adjacency on the link. Once the IGP adjacency is established and the LDP session has not been synchronized, the IGP will advertise the metric of the link to the maximum. The loopback0 address space of all devices is xxxx/32 , and x is the device number. Prefix Next-address 10.1.34.4 In all remote labels that bundle a particular prefix , the LSR uses only one of the labels to determine the outbound label for the prefix. RIB , which is the routing table, determines what the next hop of the IPv4 prefix is. The LSR selects the label of the next hop in the routing table that reaches the prefix from the remote label received by the downstream LSR . The LSR uses this information to create its own label forwarding information base, LFIB .