ccna solved papers

ccna solved papers

Keep priority 1B of the sub-TLV length Extended intermediate system reachability TLV (type 22 ) Interface eth 0/0 Tag information from 10.1.15.0/24, shared local tag: 403 Default route injection Traffic Engineering (TE) automatic bandwidth feature adjusts the bandwidth allocation for TE tunnels based on their measured traffic load: Tag NSEL is 00 ( 1B from the right ) The system ID is 0000.0c00.1111 The area ID is 39.0f01.0002 OSPF Tun Sender: 1.1.1.1 LSP ID: 521 The trick of traditional IP routing: The table eventually forwards this IP packet. C made two searches. This reduces forwarding efficiency. Type block This is 1B , which contains a number of important bits: LSA Mpls traffic-eng tunnels ip rsvp bandwidth The fields of the same background color described above are all corresponding. PATHErr is actually sent to the headend router. The main reason for sending the error message is that the link used by the TE LSP fails, or the party LSR receives the PATH message with the forged message. Mpls traffic-eng tunnels ip rsvp bandwidth 0 kbits/sec Going is the tunnel . therefore: (Tunnel0) Destination: 4.4.4.4 Remove: The top label is removed. The forwarding of the message depends on the remaining tags in the tag stack,ccna solved papers, or it is forwarded as an unlabeled message. Frame-relay map ip 10.1.123.2 102 broadcast Record Route: NONE Shutdown off R2 in e0 / 1 port in R1 crawl debug information MAC address, etc. R1#traceroute 4.4.4.4 R1#debug isis adj-packets Ip address 10.1.123.3 255.255.255.0 Token bucket fragment (service_id=1, length=6 words parameter id=127, flags=0, parameter length=5 No support for Ip multicast routing Add: The top label is replaced (exchanged) by a new label, and one or more labels are added to the upper layer of the replaced label. The configuration of R1 is as follows ( R2 does not open area password temporarily ): The unreservable bandwidth is the bandwidth remaining after being supplied to the TE , that is, the maximum bandwidth of the link minus the bandwidth currently reserved by the TE tunnel. Router ospf 1 ADSPEC Intermediate system IS Sender_Tspec (See Why is CEF remember?), Was found to give the packet label press, then press it on the label head, the label value 201 , then the next hop is B , which is sent to B . Then B receives the label package and finds that the label field in the label header is 201 , so I look at my own LFIB and find that the outgoing label of the 201 label is 301 and the next hop is C , so it replaces the 201 label with 301 , and then pays to C .