ccna 4 final exam

ccna 4 final exam

Reservable Bandwidth[5]: Ip address 10.1.24.4 255.255.255.0 My Address: 10.1.23.2 Interface eth 0/0 Intermediate system adjacent router Used to request complete LSP information when the database is synchronized on the broadcast link. My Address: 10.1.23.2 Network 5.5.5.5 0.0.0.0 area 0 Record Route: NONE Note: a FEC can contain multiple streams, but not a stream of a FEC , such as looking at a host Sina website, which is a stream and looking at Sina's video, which in turn is a stream, the two streams When Sina sends to a remote host, the path should be the same, so one FEC has multiple streams,ccna 4 final exam, but each stream does not belong to a separate FEC. Network 10.1.23.2 0.0.0.0 area 0 0x0000000E MPLS VPN Backbone carried out within for MPLS TE in the OSPF extensions and R1 build on a TE the Tunnel , for their own sources of the Loopback0 , for the purpose of R5 is 5.5.5.5 Basically, the LSP is the path through the MPLS network or a part of it that packets take. // One-way path. In fact, an LSP is a path when a packet traverses an MPLS network or a part of an MPLS network. !! It can be seen that the f0/0 port has been separated by 33M. Pop Label If the payload of the MPLS is an IPv4 packet, load balancing is implemented by hashing the source and destination IP addresses of the IPv4 packet header . Type escape sequence to abort. Tracing the route to 6.6.6.6 Flags: 0x0 Ip address 10.1.34.3 255.255.255.0 SNPA AutoRoute Router-id 4.4.4.4 AFI Authority and Format Identifier , 1- byte authorization and format identifier. The AFI field identifies the syntax of the upper addressing domain and DSP portion associated with the NSAP . The AFI field ranges from 0 to 99 decimal numbers. The higher address field provides a variety of subdomains whose values ​​are assigned by the IDI field. Each high-level domain defines its own IDI field format. Below is the address field AFI and DSP syntax types.