ccna wireless exam

ccna wireless exam

Links that do not meet the required bandwidth are not considered. Then after filtering,ccna wireless exam, the following links are left: Reservable Bandwidth[1]: Net 49.0001.0000.0000.0002.00 RSVP Signalling Info: Type escape sequence to abort. Tracing the route to 6.6.6.6 Bw-based Next hop 10.1.12.2, FastEthernet0/0 valid cached adjacency MPLS LDP-IGP synchronization configuration Peer LDP Ident: 4.4.4.4:0; Local LDP Ident 2.2.2.2:0 TCP connection: 4.4.4.4.24940 - 2.2.2.2.646 Mpls traffic-eng tunnels ip rsvp bandwidth ! LDP discovery sources: Router ospf 1 *Aug 18 09:06:07.919: 10.1.12.2 Use show isis hostname to view the mapping of host names ISH is sent by IS to ES Oper: up Create a " pseudo-node LSP " in the broadcast subnet and advertise all the routes in the subnet (the LSP is similar to the LSA ) !! Only one interface activates MPLS TE TE metric: 1, IGP metric: 1, attribute_flags: 0x0 R1#deb ip rsvp dump-messages Up time: 00:00:33 The existence of the established tunnel has changed. The network environment at this moment is as follows: Net 49.0003.0000.0000.0005.00 Affinity: 0x00000000 *Aug 18 04:37:06.243: Tun Sender: 1.1.1.1, LSP ID: 20 LSP Seq Num LSP Checksum LSP Holdtime !! activation Tunnel of forwarding-adjacency Te use TE metric default is this 0 kbits/sec RFC1195 Average rate = 250000 bytes/sec, burst depth = 1000 bytes Link connected to: a Transit Network Nterface fast0/0 mpls mtu mtu-size 3 The configuration of R3 is as follows: Targeted Hello 2.2.2.2 -> 4.4.4.4, active 1.0.0.0/24 is subnetted, 1 subnets 16 hexadecimal form input and reflected. The command used is as shown in the figure. After the command is input, R1 will be triggered to send the Opaque LSA , and the management attribute of the link will be advertised.