ccna 200 120 exam pattern

ccna 200 120 exam pattern

In the process of double-point bidirectional routing re-release, many problems may occur, such as sub-optimal paths, potential routing loops, etc. This chapter will discuss this model and existing problems in depth. Now, on R3 , re-release the direct loopback route into BGP4+ RIPv2 Input conditions: length < ge-value < le-value <= 32 Rhino.acme.com Ipv6 access-list v4map permit 2001:1::/64 2001:2::/96 The configuration of R4 is added as follows: Ipv6 router rip RIPprocess Gateway of last resort is 172.16.3.0 to network 172.16.0.0 At infinite Optimum and Distributed Switching Image OSPF multicast packets are flooded on the LAN . This is one of the most common applications of the passive-interface feature. Note that different routing protocols operate differently on the passive-interface . Advertised to update-groups: 1 Interface serial0/0 Distance vector routing protocol 6to4 automatic tunnel configuration The S position 1 indicates that this is an advertisement in response to a neighbor request,ccna 200 120 exam pattern, and if it is set to 0, it is sent actively. ISATAP ( Intra-Site Automatic Tunnel Addressing Protocol ) BGP routing table entry for 2001:5555::5/128, version 3 Paths: (1 available, best #1, table Global-IPv6-Table) Complete the configuration of the IGP protocol in the Core area. Version Devices such as hosts, routers, or servers in the network can use both V4 and V6 protocol stacks if they support dual stacks ( IPv4 and IPv6 protocol stacks) . On dual-stack devices, the upper-layer application prefers the IPv6 protocol stack instead of IPv4 . For example, an application request address that supports both v4 and v6 will request an AAAA record first , and if not, a request A record.