ccnp tshoot hands on skills exam

ccnp tshoot hands on skills exam

Configure a static default route locally, such as ip route 0.0.0.0 0.0.0.0 null0 !! Do not write to option82 9.9.12.0 is directly connected, FastEthernet0/0 If it is injected through network or re-release, the IGP next hop of the prefix will be the next-hop of BGP before injection. Switch(config)# ip default-gateway 192.168.255.254 !! Set the gateway for the access switch itself Example of multiplication characters: 5 Default route On a specific interface, if no BPDUs are received for three consecutive cycles (or max-age timeout), the STP data on the interface will age rapidly. As a result, the BPDUs are somewhat similar to the keep-alive mechanism between switches . This fast aging mechanism helps to respond quickly to topology changes. The TAG value is set when the originating ASBR generates an external LSA . If the external LSA is re-advertised to other OSPF autonomous systems, the TAG value is carried by default. !! Two ACLs are created above to match the routes that need to be treated differently. 5.5.5.5 *> 100.0.2.0/24 After the command is configured on the interface, the routing table is not updated periodically in this direction,ccnp tshoot hands on skills exam, but the update is triggered. The routing table update will be minimal , including only the initial exchange information of the routing table and the updated information when the routing table changes. This command is only valid on the serial link and must be configured at both ends of the link to produce an effect.