ccnp route 300-101 blueprint

ccnp route 300-101 blueprint

The Native VLAN must match at both ends of the trunk . Otherwise, VLAN traffic will appear. Clear ip bgp * RIPv1 29 Other configuration commands: Show ip bgp injected-path to display Option82 KEEPALIVE message Neighbor 10.1.23.3 remote-as 300 neighbor 10.1.23.3 route-map test out Network 10.1.45.0 0.0.0.255 area 0 Tag information set local tag: 100 After the server mode is enabled, the client will automatically start pruning.  open The configuration of R1 is as follows: Route . 3 : the AS_PATH : 500 the MED : 150 External RouterID : 172.16.13.1 Local network and re-routed routes, LP defaults to 100 , and can be transmitted to other IBGP neighbors within the AS . The LP is unchanged unless the policy is deployed during transmission. Network 100.0.1.0 mask 255.255.255.0 Origin: inherited the worst of origin attributes Re-routing interface connecting the local release, static routing weight is 32768 First , use the above command in the BGP process. This command will store the original BGP route sent by the xxxx neighbor in the local memory. When the inbound soft reset is configured ( clear ip bgp soft in ), the router will no longer The neighbor sends an update request, but executes the newly configured inbound policy directly in those BGP routes stored in the memory , thereby preventing the waste of resources caused by triggering large-scale routing updates,ccnp route 300-101 blueprint, but this operation still consumes memory. Therefore, be very careful when using it.