ccnp route book reddit

ccnp route book reddit

So what are the solutions? R1(config)# ip prefix-list list1 deny 172.16.32.0/21 R1(config)# ip prefix-list list1 permit 0.0.0.0/0 le 32 R1(config)# route-map test permit 10 Type echo protocol ipIcmpEcho 10.1.1.2 source-ipaddr 10.1.1.1 frequency 10 HELLO time Next hop 10.1.13.3, FastEthernet1/0 valid adjacency R3 re-releases the incoming A route, so R2 ,ccnp route book reddit, R3 , and R4 form a routing loop. Policy-list concept 192.168.12.2/24 200 i Network 16 bits Route-map test permit 10 Set origin incom Number of existing VLANs 8 Send BPDU : 1 to 3 [Experiment 1 ] There is a main class route; there is a default route, and the main class route is taken. 802.3 uses the length field, but the Ethernet frame uses the type field to identify the protocol at the network layer. In an Ethernet II frame, a two-byte type field is used to identify the higher layer protocol contained in the data field, that is, this field tells the receiving device how to interpret the data field. In order to improve processing efficiency, the data frames inside the switch are always tagged with VLAN tags and processed in a unified manner. When a data frame enters the switch port, if there is no VLAN tag and the port is configured with PVID ( Port VLAN ID ), the data frame will be marked with the PVID of the port . If the data frame has been with the VLAN the Tag , then, even if the port has been configured with the PVID , the switch does not give the data frame marks the VLAN the Tag .