ccnp route version 7 final exam

ccnp route version 7 final exam

Fa0/20 For the next hop and route tag, see Volume I, page 189 . BGP has three management distances,ccnp route version 7 final exam, 200 learned from IBGP and 20 learned from EBGP . This is because the design concept of BGP works. In the BGP process: neighbor xxx default-originate to pass the default route to a specific neighbor. This configuration does not require a default route in the routing table. A bit like OSPF 's default-originate always 3 jumps. Redistribute local direct connection network segment into BGP , MED value is 0 ; redistribute local static route into BGP , MED value is 0 Port-Security Overview The so-called seed metric refers to when I use a route to re-publish from an external routing protocol to this routing protocol, if the metric of the route is not manually specified , the default metric is used . Look at the following table (the following table is a recognized default value that can be modified using the default-metric in the routing process ): RIP-2 MD5 Authentication Set next-hop specifies the address of the next hop , specifying the next hop of BGP . IGP If R2 is added to the default route of R3 on the above basis, the data of the PC to the 10.1.13.0 network is still lost to R1 , which means that ip defaut-next-hop has higher priority than the default route. * i100.0.1.0/24 Show pvlan mapping 345 In R3 and R5 between increasing an IBGP connection, thus R3 and R5 of BGP routes do not need to pass by R4 (albeit over a packet still R4 forwarding, but R4 terms, R3 passed to R5 of these packets, Just an ordinary IP message). It should be noted here that BGP is different from IGP . IGP is like OSPF . To establish a neighbor relationship, two routers need to be directly connected. BGP does not need to be directly connected because it is a connection established based on TCP .