ccnp route map

ccnp route map

After deploying loopguard : Port-Security deployment considerations TRUNK The LSA sends the neighbor to the neighbor,ccnp route map, so the local route is filtered, and the neighbor has (because the neighbor has received the LSA ). Redistribute connected subnets redistribute rip metric 10 subnets Option packet structure: None Ip prefix-list 1 permit 172.16.1.0/24 ip prefix-list 1 permit 172.16.2.0/24 route-map test permit 10 Fast switching may be called route-cache switching on some data. Router bgp 345 Used to announce aggregated and selected detail routes (suppress specific detail routes), followed by route-map xxx , matched by route-map Vlans allowed and active in management domain R4 Set community no-export additive 10.1.12.1 from 10.1.12.1 (1.1.1.1) Weight Path ? We restore the experimental environment to the basic configuration: BGP neighbor relationships are as follows As-path: all specific routes received as numbers are placed in {} , the calculation AS_Path the length of the AS is only counted as . 1 th AS (Note that this feature is not supported in truncated switching mode on 6509 switches ) FastEthernet1/0 -------------- Sw(config)#vlan 202 SW1#show int trunk Interface mode, configure the interface as DAI trusted , the default is untrusted We can affect the routing by setting the LP value. For example, the same implementation allows R4 to access 100.0.1.0 and go to R3 , accessing 100.0.2.0. Router(config)#ip dhcp pool [pool name] Open Shortest Path First (OSPF) Routing Information Protocol (RIP) Route map reference Solution: Use distribution lists to avoid the sub-optimal routing problem ? The buddy first introduced the above network environment. This Nima is a fairly classic case. OR1 and OR2 are the egress routers of the network, which are respectively connected to the egress lines of Netcom and telecommunications. PAT is implemented on both egress routers , so that intranet users can access the extranet. In addition to OR1 , The next hop of the route advertised by the device is 0.0.0.0) Match interface : To distribute any routes that have their next hop out one of the interfaces specified, use the match interface command in route-map configuration mode . The understanding is that the match interface matches the next hop out interface is the route of this interface. entry FastEthernet1/0 In the ETHERNET_II frame, the upper layer protocol is distinguished by the Type field. At this time, it is not necessary to implement the LLC sublayer, and only one MAC sublayer is included . And IEEE802.3 frames in the LLC sublayer of the link layer in addition to the traditional definition of services, but also adds a number of other useful features. These features are provided by the DSAP , SSAP, and Control fields.