ccnp switch drag and drop questions

ccnp switch drag and drop questions

Standby is 10.1.1.252, priority 100 (expires in 7.572 sec) Weight Path Neighbor table Experimental verification ( IBGP equivalent load balancing) Protocol overview Switch(config)# mls rate-limit layer2 port-security rate_in_pps [burst_size] to sum up Known via "bgp 200", distance 20, metric 0 Tag 13, type external ! Mode Locally find a route to the neighbor and try TCP three-way handshake. Waiting for completion, the authentication is completed during TCP setup. If the TCP connection is not up, enter the Active state and try to connect repeatedly. Use set excommunity cost x to set in route-map Metric FastEthernet0/0 Origin AS-Path Next hop Route-map WT2 permit 20 match ip address prefix-list 2 set weight 200 TCAM is the table that is checked when the routing module or router is used for Layer 3 forwarding. Then in the BGP process, network 0.0.0.0 can inject this default route into the BGP process . The default route introduced in BGP by this method will be delivered to all BGP neighbors. None Write-delay Configure delay timer for writes to URL Configuration example The program seems to be able to solve the problem, but brought new problems, first of all to R1 , for example, R1 by way of re-release of the introduction of 1.1.1.0 , the route through BGP updated way to the R2 , R3 ,ccnp switch drag and drop questions, R4 ( accessed through multiple links), this time on these routers, 1.1.1.0 route original was - incomplete ; and in order to achieve the above requirements, R2 in its local network of 1.1.1.0 , this coming, 1.1.1.0 in R2 When a local route is imported into BGP and the AD value becomes 200 , R2 advertises 1.1.1.0 to its EBGP neighbor , and its advertisement 1.1.1.