ine ccnp switch workbook pdf

ine ccnp switch workbook pdf

Ip route 172.16.1.0 255.255.255.224 192.168.23.3 !! Press the longest match, go this one In the federal scope, the member AS number is pushed into the AS_PATH , but not published outside the federation, and the AS_PATH of TYPE3 , 4 is used . Multilink Multilink-group interface 3.0.0.0/24 is subnetted, 1 subnets About the prefix list Switch(config)# vlan 10 In R2 , the energy from each R1 and R3 learning to 100.0 the EBGP route, if arranged on maximum-paths 2 Switch(config)# interface fast0/15 On R1 , only the summary route 32.0/21 is filtered,ine ccnp switch workbook pdf, and all the detailed routes are released. If a standard ACL is used to match the route, how to write it? We restore the experimental environment to the basic configuration: BGP neighbor relationships are as follows Protocol overview Ip summary-address rip xxxx yyyy // Note that this summary does not support CIDR supernet . 100 i Policy deployment in BGP OSPF , but R3 ignores this route (locally configured with a static summary route pointing to null0 ), although the LSA is still passed to R5 , which means that although R5 still has a 1.0.0.0/8 route, the packet After being thrown to R3 , it is finally discarded at R3 , so there is still a problem here. Next hop address: The IP address of the interface of the neighboring router that needs to pass to reach the destination . Example 3 : The TCP connection was not successfully established and the TCP connection was tried repeatedly . (global configuration command) activates portfast features on all non- trunk interfaces Next, we SW2 on the vlan10 port removed, directly in fa0 / 2 on the no switchport access vlan Router bgp 100 100 i Between routers, routing information is passed, and the distribution list has absolute control over routing information. Therefore, if it is in the direction, by deploying the distribution list, the specific route can be filtered, so that the local routing routing table of the distribution list is changed, and when the local router updates the routing information to the downstream router, the actually updated content is An entry that is affected by the distribution list.