ccnp switch 7.0 instructor lab manual

ccnp switch 7.0 instructor lab manual

20.20.20.0/24 Unused The BGP update is carried by the TCP protocol. The port number used is 179. Because BGP requires TCP , there must be a BGP peer . Example 1 : However, if the R1 release carry on a tag external routes, and R2 re-released on OSPF into RIP , tag lost: Database , this database is DHCP Snooping listens for DHCP information recorded after the interaction, inside contains the client's IP , the MAC , belongs to VLAN -related information, etc., and this information, just as ARP 's legality verification. When a local BGP route is advertised to an IBGP peer ,ccnp switch 7.0 instructor lab manual, the MED value must be carried . 30.30.30.0/24 Both A and Root enter the Listening state on both ends of Link1 , and A will receive the BPDU sent by Root . * >i11.11.11.0/24 The problem that the static route associated with the outgoing interface is in the network Route-map test permit 20 Ip policy route-map PBR ? This is a very typical scenario. GS_SW is an aggregation layer switch that runs OSPF with the core switch . The GS_SW needs to advertise the network segment corresponding to the VLAN to be hanged , so that the core switch can learn the relevant routes. Then, once GS_SW announces the network segment corresponding to these VLANs in the OSPF process , the corresponding SVI interface will flood the OSPF HELLO message to the VLAN , and these messages are actually redundant.