ccnp switch aaadot1x lab

ccnp switch aaadot1x lab

TIMER 10.1.34.3 from 10.1.34.3 (3.3.3.3) Weight Tools Overview <0-4294967295> 32-bit tag value MD5 digest : 0x49 0x3C 0x1F 0x79 0x15 0x00 0xC7 0xAE 0x0E 0xDC 0xDD 0xEF 0x93 0xA5 0xB6 0x26 Ip community-list 11 permit 100:11 Open loopback on R2 , IP is 172.16.10.0/24 , 172.16.11.0/24 Fa0/22 1,10,20,30 Configuring DAI logging OSPF routing: including 3.3.3.0 , and the direct connection network segment 192.168.23.0/24 declared into OSPF is injected into the EIGRP process. This R1 EBGP non-equivalent load balancing AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd First come to know the first three-layer interface: SVI switched virtual interface, a logical interface of SVI , that is to say not a physical interface, when we create a VLAN on the switch , we can create a The SVI interface corresponding to the VLAN , for example, we created Switchport mode private-vlan host So as long as the 1.1.1.0 network is not DOWN , R1 will always send default routes to R2 . The process of processing a VLAN frame by an access port is as follows: 100 1.1.1.1 (metric 129) from 4.4.4.4 (4.4.4.4) Optional non-delivery Manually modified. Ip mtu refers to the maximum value of the ip message. Origin IGP, metric 0, localpref 100, valid, internal Snooping can protect against DHCP spoofing. On the other hand, it will get DHCP snooping binding on the switch. HOLDTIME CISCO defaults to 180s ( 3 times KEEPLIVE timer ), which is included in the open message. Maximum MAC Addresses : 1 !! The maximum number of secure addresses, the default is 1 Match community 11 Route 3 : AS_PATH : 500 Match ip address prefix-list 1 2 LocPrf 192.168.12.2/24 Reference material Match ip address prefix-list 2 router bgp 100 ? Network 100.0.2.0 mask 255.255.255.0 If the MAC address is not in the security address entry and the security address has reached the maximum number, the illegal data will be discarded only. The legal data will be forwarded as usual without triggering a syslog message. The " Security Violation Count " under the interface is not. Will add 1 . If it is restrict ,ccnp switch aaadot1x lab, the illegal data is discarded, and a syslog message is triggered at the same time . Furthermore, the Security Violation Count is incremented by 1 , and the legal data is forwarded as usual.