9tut ccna simulations

9tut ccna simulations

Was used to replace TLV128 . The configuration of R2 is as follows: Tib entry: 10.1.12.0/24, rev 4 RSVP and label The interface will be created. We just need to put the traffic into the tunnel port, there are still a lot of methods, we will continue to introduce in the following content. Path: valid Except for HELLO packets based on UDP646 , other packets are based on TCP port number 646. The CSPF calculation is performed by the head end of the tunnel , and the result of the calculation is a string of IP ( path of the tunnel ) P2P Links: Multiacces Links: Ip cef Reservable Bandwidth[7]: Mpls traffic-eng tunnels mpls ip Interface loopback0 ! Or Tunnel Id I/E AFI+IDI is used to identify the Domain Level1 area IS-IS supports ISO connectionless network environment,9tut ccna simulations, pay attention to the data link is Only when a neighbor solicitation label mapping message to the local strip prefix , local will announce the label mapping messages to neighbors 1178 Area Address(es): 49.0001 SNPA: cc03.1ab0.0000 Reservable Bandwidth[3]: ! Now we will complete the following configuration on R2 : Ip explicit-path name R2R3R4 enable next-address 10.1.12.2 Show mpls ldp parameters Protocol version: 1 (See Why is CEF remember?), Was found to give the packet label press, then press it on the label head, the label value 201 , then the next hop is B , which is sent to B . Then B receives the label package and finds that the label field in the label header is 201 , so I look at my own LFIB and find that the outgoing label of the 201 label is 301 and the next hop is C , so it replaces the 201 label with 301 , and then pays to C .