ccnp route 300-101 arabic

ccnp route 300-101 arabic

B performs the corresponding checksum confirmation according to the type of the connection, and after confirming by these checksums, it is sent to the upper layer. 1> Soft reset using updated routing information Statically configure a dhcp snooping bingding dabase entry. The command is configured in privileged mode. A frame whose type field has a value of 0800 represents an IP protocol frame. Because Layer 3 switches support so many types of interfaces, the deployment of Layer 3 switching networks is more flexible and scalable. In TCP/IP , the encapsulation format of Ethernet IP data packets is defined by RFC 894 , and the IP data packet encapsulation of IEEE 802.3 network is encapsulated by RFC. Knowledge review DAI configuration example Neighbor 10.1.13.3 remote-as 345 Then IOS will automatically change the command to Set ip next-hop ip1 ip2 ...... None <1-4294967295> community number In this way, whether the method of re-publishing the static summary route or the method of distributing the list filtering route can ensure that the network is not interrupted in the event of a network failure, as follows: Mechanism overview Use clear port-security dynamic command to clear all port-security interface by dynamically learned secure address entry using clear port-security sticky command to clear all sticky secure address entries Total MAC Addresses 0 The optional parameter length is used to indicate the length of the optional parameter field When the network is normal, the data is forced to go ISP1 , ping 100 remote network data to ISP1 The secondary VLAN is divided into a community VLAN and an isolated VLAN . Route 2 : AS_PATH : 100 learner Manual summary Set the timer of STP Router bgp 100 Interface f0/2 SW3#sh vtp status VTP Version capable VTP version running VTP Domain Name VTP Pruning Mode After changing the topology, the interface IP of R2 has changed. At this time , the RIP sent by R1 is updated, and the source address is still 192.168.12.1 . After receiving R2 , it finds that the interface IP that is updated with the local is not in a subnet, so R2 ignores the update message of R1 . In addition,ccnp route 300-101 arabic, the message sent by R2 to R1 is accepted by R1 , because R1 thinks that the RIP update message source address 192.168.12.5 sent by R2 is on the same subnet as its own interface.