ccnp route 300-101 ospf

ccnp route 300-101 ospf

State BGP current callback state is basically opensent, etc., admin indicates that the neighbor is managed-type shutdown ,ccnp route 300-101 ospf, when Mtu 1500 , so it will be fragmented, then on R2 , the two fragments are reorganized. OK The AD value of 11.11.11.0/24 is adjusted to be larger than OSPF , for example 130 . So the configuration is as follows: R4#show ip bgp 172.16.0.0 Full IBGP interconnection between route reflectors in the AS !! The default VTP prunnig is off When track1 is true , that is, 10.1.1.2 is reachable, the data of the PC accessing the 100 network is lost to 10.1.1.2 . If track 1 is hung, the next next-hop is switched. Router ospf 3 Aggregate-address summary address attribute-map abc After a few seconds, D receive this the BPDU , Block out port P1 Peer group Default route ? Off: EtherChannel not configured on interface Instead of choosing R3 ? This is determined according to the routing principle of BGP (see the BGP document of Red Tea Three Cups Zhu SIR ). Here, the final impact of routing is such a rule "preferred routing from EBGP neighbors (relative to IBGP neighbors) "), R2 is the EBGP neighbor of R5 , so it is preferred. R* 0.0.0.0/0 [120/1] via 192.168.12.1, 00:00:03, Serial0/0 0 100 0 100 i Network 100.0.2.0 mask 255.255.255.0 When the RR reflects the route from the client to the non-customer, it also appends its cluster ID to the CLUSTER_LIST , and if the CLUSTER_LIST is empty, it creates one. If the route reflector finds that its local cluster ID appears in the CLUSTER_LIST of the route it received , then it knows that a loop has occurred and ignores the route. The CLUSTER_LIST attribute is only used for RR anti-rings.