ccna vce download

ccna vce download

Router ospf 1 Local tag Next-address 10.1.34.4 Metric Type: TE (default) InLabel : - 0 kbits/sec Configured on L1/L2 rouer, which is R2 , a default route is generated and flooded to R3 , but not to R1 . Or Tunnel Id The configuration of R3 is as follows: End system adjacency routing Peer-to-peer network Local tag Initial database synchronization is performed before the adjacency is formed 1bit R2#show mpls forwarding-table 19 Mpls ldp router-id loopback0 mpls label range 100 199 interface fast0/0 Fa0/0 OutLabel : FastEthernet1/0, implicit-null RSVP Signalling Info: IS Outgoing interface In this way, in the route of L2 , the route matched by the route-map will be injected into the level1 area , then R1 can learn 5.5.5.0 . Type IA , i.e. isis the interarea route, i.e. isis inter-area routes. *Aug 18 09:06:07.919: The OSPF adjacency cannot be established, but R1 has only one available path to reach R2 , so OSPF adjacency is established unconditionally. At the same time, R1 and R2 will directly announce the 10.1.12.0/24 direct link,ccna vce download, which will be advertised with the largest metric 65535 . The purpose of this is that if the network environment is a redundant link environment, then the metric of the link can be made the worst from the perspective of the IGP , so that the LDP path bypasses the link.