ccna exam details

ccna exam details

Mpls traffic-eng tunnels ip rsvp bandwidth The loopback0 address space of all devices is xxxx/32 , and x is the device number. We complete the experiment as long as the R2 and R4 configuration domain-password can, Rl is a zero-configuration ( Domain Authentication actually level2 LSP embedded for authentication TLV ). *Aug 18 04:37:06.239: IS Hops:1 ! *Aug 18 09:06:07.919: peak rate =250000 bytes/sec So far, the basic configuration has been completed. Now let 's create a TE Tunnel on R2 and R5 : The way to use static routing is of course the easiest, and the best control, but the scalability is too poor, if there are multiple tunnels, then configuration and maintenance is more troublesome. i L1 The VRF IGP running between PE and CE is OSPF , using process number 1. Routing information diffusion and database synchronization Ip unnumbered Loopback0 tunnel mode mpls traffic-eng tunnel destination 5.5.5.5 Thus, as long as 5.5.5.0 in R2 , then the routing table of R2 will, in its region to 49.0001 in flooding- LSP for the ATT is set, we can try to R5 of Loopback the shutdown , so 5.5.5.0 hung , and when R2 is detected this change, not found in the routing table 5.5.5.0/24 route, then R2 will trigger a LSP updates the LSP in the ATT not set, so a to R1 will only produce a Point to the default route for R3 . When 5.5.5.0 is restored,ccna exam details, then R2 will generate an LSP and set ATT again (this 5.5.5.0The route does not have to be an ISIS route. You can play it with a route pointing to null0 , and set the ATT .) One thing to note here are: tools used to match the recommended route prefix list, I was in 12.