ccna resume

ccna resume

This inbound label packet, with a label value of 203 , indicates in the LFIB table of R2 that 203 needs to be exchanged to 300 and then dropped to the next hop. ADSPEC R1#show mpls traffic-eng tunnels Fa0/0 An IS-IS router can be configured to summarize IP routes into Level 1, Level 2, or both, at the same time, The fields of the same background color described above are all corresponding. IS-type This will result in the OL bit of the LSP generated by R2 , and the result seen on R1 is this: R2 configuration is as follows Remote binding: tsr: 2.2.2.2:0, tag: 203 I/E Outgoing 1.1.1.1/32 1112 *Aug 18 11:26:02.546: (Tunnel0) Destination: 4.4.4.4 IS-IS The external route is not carried in the LSP . The average allocated traffic on the interface. Type escape sequence to abort. Tracing the route to 4.4.4.4 Mpls ldp neighbor 3.3.3.3 targeted ldp Thus, as long as 5.5.5.0 in R2 , then the routing table of R2 will, in its region to 49.0001 in flooding- LSP for the ATT is set, we can try to R5 of Loopback the shutdown , so 5.5.5.0 hung , and when R2 is detected this change, not found in the routing table 5.5.5.0/24 route, then R2 will trigger a LSP updates the LSP in the ATT not set, so a to R1 will only produce a Point to the default route for R3 . When 5.5.5.0 is restored,ccna resume, then R2 will generate an LSP and set ATT again (this 5.5.5.0The route does not have to be an ISIS route. You can play it with a route pointing to null0 , and set the ATT .) One thing to note here are: tools used to match the recommended route prefix list, I was in 12.