ccna exam practice test online

ccna exam practice test online

Neighbor FE80::CE01:8FF:FED8:10 remote-as 12 neighbor FE80::CE01:8FF:FED8:10 password cisco Image Set tag 10 PC1#sh ipv int Define multiple serial numbers under route-map . The serial number has a priority order when performing matching actions. Authentication is identified by setting the address family ID field to all 1s ( 0xFFFF ). Route summary Router-id 4.4.4.4 Image Image Therefore, from here we can see that the route summary is a risk of looping. One way to solve the above problem is to add a static route on the Layer 3 switch: ip route 192.168.0.0 255.255.0.0 null 0 , this way, when it receives access 2.2.2.0, but the update is 2.0.0.0 after the summary Static NAT-PT (two-way) ! At Jul 31 2012 23:59 Ipv6 unicast-routing OR1 configuration Ipv6 address 2002:CA65:1703 ::FFFF/64 ipv6 enable Vrf definition cisco rd 1:1 Image # 38.25.63.10 Linklocal address of the router : Image The following are the properties of the BGP-4 specification that have been updated to support IPv6 : Dns-server 2000::8 domain-name HelloWord Level2 router factor OK , now go back to the main class network number 172.16.0.0/16 ,ccna exam practice test online, then we will go out and look at the picture. 172.0.0.0/8 actually shifts the mask of this class B address to the left by 8 bits , so that the network number obtained is actually a large network number including 172.16.0.0/16 . Call it supernet . RIP re-releases the default route Router ospf 100 134 MTU is 1400 bytes Exit E : global scope; Next Hop 2023::3 Route-map defaults to permit , the default serial number is 10 , the serial number is not automatically incremented, and the serial number needs to be specified. Interface fa1/0 Ipv6 enable to sum up Ip route 100.0.0.0 255.0.0.0 null0 Image Le keyword is not written, then the default is greater than 24 less than 32 Static NAT-PT (two-way) BVI Bridge-Group Virtual Interface First of all, we have an IPv4 network, IPv4 network, the vast majority of network devices do not support IPv6 , in addition to a host terminal, and a router, we need this to access the IPv6 resources.