ccna security lab dumps

ccna security lab dumps

Image Ipv6 router ospf 100 The result is unreasonable, because the message exceeds the MTU of the R2 Fa1/0 port when it is passed to R2 , so R2 sends back an ICMPv6 message with TYPE=2 ( packet too big ) to R1 . In this back to R1 in the ICMPv6 message includes the allowed the MTU = 1400 , to inform the At this time, on R4 , only 1.1.1.0/24 and 192.168.13.0/24 can be learned. R2(config)# router ospf 1 Image Ip prefix-list ABC seq 5 permit 172.0.0.0/8 - R1#sh ipv6 route ospf Ipv6 address 2001:0001::FFFF/64 Ip summary-address rip xxxx yyyy // Note that this summary does not support CIDR supernet . RIP and OSPF re-release The configured static network path is redistributed into OSPF . In this way, when the intranet user needs to access the Netcom resources, because of the details of the network access, go to OR1 . To access other resources, take the default route to OR2 . IPv6 source IPv6 destination IP protocol number 88 Manual IPv6 over IP tunnel Router(config-router)# router-id xxxx Network 10.1.34.3 0.0.0.0 area 0 Neighbor 2001::1 update-source loopback 0 exit-address-family Configure OSPF unicast updates: Tunnel server Switched Ip address 10.1.12.1 255.255.255.0 IPv4 Application Ipv6 route 2002:CA65:C01::/48 Tunnel0 Metric problem Because of this mapping,ccna security lab dumps, R2 will B sent over the packet destination address of 202.101.100.100 replaced with 2001: 1 :: 1 , while the B source address is an IPv4 address, supposed to do? Remember that we configured the prefix reserved by NAT-PT ? I.e. 2001: 2 :: / 96 this stuff, R2 to B 's IPv4 mapped address prefix to form a temporary IPv6 address: 2001: 2: CA65 : 6402 , while generating a new local map entry: 2001:2::CA65:6402 maps to 202.101.100.1 as shown above.