200-125 dumps 2019

200-125 dumps 2019

Verify the role of the match interface 2 The planning of the IS-IS network is as shown in the topology. The configuration of R1 is as follows: Bgp router-id 3.3.3.3 No frame-relay inverse-arp ipv6 enable The MPLS Domain consists of three routers: PE1 , P , and PE2 . The IGP protocol running in the domain is OSPF , and the process ID is 100 . Each of the three routers announces its own loopback port into Core 's OSPF . The address of Loopback is xxxx/32 , and x is the router number, such as PE1 is 2.2.2.2 , P is 3.3.3.3 , and PE2 is 4.4.4.4 . Default router is FE80::CE00:1AFF:FEC4:10 on FastEthernet0/0 Route summary ! Default route delivery Ip route 0.0.0.0 0.0.0.0 192.168.123.1 32 bits IPv6 interface address: This TLV contains an IPv6 interface address ( 128bits ). The decimal value assigned to the IPv6 interface address TLV is 232. For IS HELLO PDUs , this TLV must contain the Linklocal address, but for LSPs , the TLV must contain a non- Linklocal address. R 3.0.0.0/8 is possibly down , routing via 9.9.12.2, FastEthernet0/0 Subnet Mask Image We see, PE1 on've learned from CE2 of IPv6 routing, and continue to look at Review the previous IPv6 only network access to the IPv4 only network using the V4 address pool. Next,200-125 dumps 2019, we R3 up of ping 2222 :: 2 , this action will cause the R3 transmits an ICMPv6 packet, source 2000: 123 :: 3 , the purpose of 2222 :: 2 , the packet will be sent to R1 , when R1 After receiving, he found that the packet will be forwarded from the interface that received the packet, and the next hop IP is on the same network segment as the interface, proving that the next hop is better than itself (distance from the destination) closer).