ccnp route validity

ccnp route validity

Configuration Example Verify the value of experiment 1 ORIGINATOR_ID (interface) ip load-sharing per-destination Therefore,ccnp route validity, in fact, the ORF is a feature of the route-filtering by means of the prefix-list . The prefix-list is pushed locally to the peer to allow the peer to perform routing prefix filtering. Access-list 2 permit 192.168.2.0 0.0.0.255 route-map PBR permit 10 confidential Next Hop Implementation point 42 All VLANs 100 Example 1 : Using route-map to associate neighbor filtering routes Note that this time you add the extend keyword in the send-community Configuration command 46 R 1.1.1.0/24 is possibly down, C and D are not aware of 1.1.1.0 (they only run OSPF , not running BGP ), and thus become a routing black hole. Note that although the CD is not running Router bgp 12 table-map PA *>i100.0.2.0/24 After the Uplinkfast feature is activated , the switch automatically adjusts some parameters: Internal BGP Run RIP between R1 and R2 (declare direct connection and their respective LOOPBACK ). At this time , the update package sent by R1 has the source address of 192.168.12.1 . Dampening takes effect only on EBGP routes and invalidates IBGP routes. AS65102 as a transit region ( trasit AS ), the AS inside BCDE running the OSPF , such that AS within reachable; D and C did not run Use the err-disable command to modify the duration of the err-diasable state. The default is 300S. Device ID Community number in aa:nn format Add to the existing community We can affect the routing by setting the LP value. For example, the same implementation allows R4 to access 100.0.1.0 and go to R3 , accessing 100.0.2.0. Loopback Loopback interface Local-as Router ospf 1 Followed by ACL to match traffic. When the RR reflects the route from the client to the non-customer, it also appends its cluster ID to the CLUSTER_LIST , and if the CLUSTER_LIST is empty, it creates one. If the route reflector finds that its local cluster ID appears in the CLUSTER_LIST of the route it received , then it knows that a loop has occurred and ignores the route. The CLUSTER_LIST attribute is only used for RR anti-rings.