ccnp switch labs packet tracer

ccnp switch labs packet tracer

Then R2 introduced locally 1.1.1.0 of BGP routes,ccnp switch labs packet tracer, and inherits from OSPF learned 1.1.1.0 of Metric 2 , then R3 on AS_PATH several commands Communicates with only promiscuous ports RIPv2 supports authentication by changing the field in the RIP message that should normally be the first route entry . In the single update message with authentication , the maximum number of route entries that can be carried is reduced to 24 . MAC address allocation and reduction ? Community Aggregator * 10.1.12.1, from 10.1.12.1, 00:07:30 ago BGP table version whenever the BGP table changes, this value is +1 Network 100.0.2.0 mask 255.255.255.0 We use ip ospf cost 100 on the F0/0 port of R4 to increase the interface cost , so the result is as follows: R3 receives two routes, respectively carrying the community attribute as above. Now, we only want to delete the no-export attribute of the 11 route . Offset-list 1 out 1 serial 0/0 Router (config) #server dhcp turn on DHCP services. By default, the Cisco IOS DHCP server and relay agent features are enabled on your router In the initial situation, when R2 updates 192.168.12.0/24 route to R3 , we look at the attributes of the route prefix in the updata message: DLY=2560 , because the DLY of the R2 F0/0 interface is 100 microseconds. The unit in the message is 10us , so 10*256=2560 , this value is the value carried in the DLY field in the message . The value of the bandwidth is also similar. This can all be calculated, no problem.