ccnp switch course outline

ccnp switch course outline

OSPF routing: including 3.3.3.0 ,ccnp switch course outline, and the direct connection network segment 192.168.23.0/24 declared into OSPF is injected into the EIGRP process. This R1 As an update source, send it to R3 . i Switch(config-if)# switchport access vlan 10 Switch(config)# interface fast0/2 Switch(config-if)# switchport access vlan 20 None Etherchannel port does not support pvlan After the MAC sublayer of A is added to the MAC address and the LENGTH field, it is sent to the data link. RIP version number: C and D are not aware of 1.1.1.0 (they only run OSPF , not running BGP ), and thus become a routing black hole. Note that although the CD is not running doing what The packet is captured as follows ( R3 sends the BGP update package to R4 ): Configuration example: As shown in the figure, R1 and R2 open the LOOPBACK interface with the addresses 1.1.1.1 and 2.2.2.2/24 respectively . 100 AS_PATH type 2 : AS_SEQENCE detailed IP policy routing is disabled If the switch does via a untrust interfacing a downstream switch, and release of the desired received by the interface, with a downstream switch sends out option82 of DHCP messages, use the global command: IP Information Option DHCP Snooping the allow-Untrusted , while Because it is a DHCP packet received through the untust interface , a DHCP snooping binding database entry is created based on the result of the interception .