ccnp switch complete guide

ccnp switch complete guide

This global configuration command enables PBR to take effect on locally originated traffic. Catos port switch ID in the default priority 32 (priority . 6 th 'bit ) , the IOS switch default 128 (priority field . 8 bits) The "original Ethernet frame" is up to 1518 bytes, the IP MTU of 1500 , plus the source destination MAC address is 12 , the type field is 2 , CRC4 , plus 30 bytes of ISL encapsulation, which is 1548 bytes. There is indeed no atomic_aggregate . ^ At the same time network 1.0.0.0 , then 1.0.0.0 will be announced The first 8 bits of the route must match the first 8 bits of 172.0.0.0 ,ccnp switch complete guide, the other bits do not care, and the mask must be /8 , /9 , /10 , ..., /24 In the same network topology, if there are two different routing protocols, because the mechanisms of different routing protocols are different, the understanding of routing is different, which causes the isolation of routing information in the network. This is most likely a network within the same autonomous system. The entire network needs to be interoperable. What should I do? This requires the use of routing re-release.