ping-t ccnp route

ping-t ccnp route

Abc+d OSPF redistributed directly connected interface default cost20 ; redistributed static route default cost20 ; using the default-metric can modify and redistribute static routes into other routing protocols OSPF default after the cost , but this command to redistribute directly connected interface. invalid. Match metric matches the route with the specified metric. match route-type matches the specified type of route match community matches the BGP community. Optional non-delivery CISCO Note: The DHCP option-82 feature is supported only when DHCP snooping is globally enabled and on the VLANs to which subscriber devices using this feature are assigned. In general, a Layer 3 switch contains two types of ports: Layer 2 interface L2 and Layer 3 interface L3. VLAN field, 15 bits are currently used 10 th, then the support up to 2 of the 10 power = 1024 th VLAN R2#show adjacency detail Switch(config-if)# ip address 192.168.20.254 255.255.255.0 Switch(config)# mac address-table static machine mac interface vlan vlan number to cancel with no mac address-static ...... Set ip next-hop 10.2.2.2 Must be zero In R3 on If the static route configured by the outbound interface is configured,ping-t ccnp route, the router considers the destination network segment as a local direct connection . Therefore , when the RIP is in the network , it will be announced. Experimental example: Calling in the distribution list Router bgp 100 So looking at the above picture, two VLANs are created on the Layer 3 switch : 10 and 20 , and the addresses of the SVIs of the two VLANs are assigned as the user gateways of the respective VLANs , so that the routing table of the switch is There are routes for two VLAN segments. Then, when the two VLANs need to communicate with each other, the user of VLAN 10 will drop the data to his own gateway, that is , the SVI of VLAN 10. After the data arrives at SVI10 , the Layer 3 switch looks up the table and finds that the destination is the network segment where VLAN 20 is located. Throw the data out of VLAN 20 and eventually reach the destination VLAN 20 of the PC .