ccnp route requirements

ccnp route requirements

May be provided for routing cost , cost-ID is equal to the time, preferably cost small. If the cost is equal, select the cost-ID is small. 120 Router bgp 64513 no synchronization Tag rewrite with Fa1/0, 10.1.13.3, tags imposed: {} via 10.1.12.2, FastEthernet0/0, 0 dependencies Use a static route to the next hop description The frame structure formed by the MAC sublayer is mentioned in the introduction above , including IEEE802.3 frames and ETHERNET_II frames. Set origin set tag switchport trunk encapsulation dot1q switchport mode trunk The medium to root has the least overhead, so the uplink port is RP . SW3 is different. Since the bandwidth of the interface connected to root is only 10M , the interface connecting SW2 wins as RP . Finally choose DP . I won't go into details. Set comm-list del delete route-map test permit 20 IGRP/EIGRP Bytes IP Routing Overview Vlan 10 If there are multiple routes from the same neighboring AS and multiple paths are available through Maximum-paths , all routes with the same cost are added to Loc-RIB. Internal EIGRP Protected port can only communicate with unprotected port (default) Access-list 1 permit 11.11.11.0 ARP response packets can be sent directly without a request, which leaves a huge loophole for the attacker. Dampening takes effect only on EBGP routes and invalidates IBGP routes. BGP path attribute Vlans in spanning tree forwarding state and not pruned Spanning-tree Must be zero Switch(config-if)# switchport nonegotiate BGP --------------- 192.168.10.1 //The details are not released. Select the route with the smallest neighbor IP address ( the address of the neighbor in the neighbor configuration of BGP , that is, the update source IP of the neighbor ) 20.20.20.0/24 command In the ETHERNET_II frame, the upper layer protocol is distinguished by the Type field. At this time, it is not necessary to implement the LLC sublayer, and only one MAC sublayer is included . And IEEE802.3 frames in the LLC sublayer of the link layer in addition to the traditional definition of services, but also adds a number of other useful features. These features are provided by the DSAP ,ccnp route requirements, SSAP, and Control fields.