ccnp switch chapter 8 answers

ccnp switch chapter 8 answers

IP routing table ( IP Routing the Table ) Origin attribute (priority order: IGP > EGP > Incomplete ) * i100.0.1.0/24 MD5 digest : 0x49 0x3C 0x1F 0x79 0x15 0x00 0xC7 0xAE 0x0E 0xDC 0xDD 0xEF 0x93 0xA5 0xB6 0x26 10.1.34.3 from 10.1.34.3 (3.3.3.3) The above interface loses the portfast and bpdufilter features immediately after receiving the BPDU ,ccnp switch chapter 8 answers, and becomes an ordinary spanning-tree interface. However, at this time, R3 will also receive the summary route from R2 release, which may form a routing loop, so it needs to be filtered out. Add configuration on the BGP process on R2 : It means for VLAN100 traffic, not to log the ARP ACL discarded packets match Internal Route-map WT1 permit 20 match ip address prefix-list 2 set weight 100 : 1 to 3 Assigning community 100:11 to route 11.11.11.0/24 on R1 and passing it to R2 , then R1 is configured as follows: Associate the static route of the next hop The following uses an example to illustrate the application of SSAP and DSAP . Assuming that Terminal System A and Terminal System B are to use a connection-oriented and reliable data transmission service, the following process occurs: Routing feedback 42 Path A strange phenomenon has appeared. It seems that R4 does not reflect the route from R5 to R3 . Why? In theory, the RR will learn from non- client of IBGP neighbor to route reflection to their Client , but it is clear, in this experiment, R4 and did not learn from R5 route reflection to their Client . Each routing table entry must include at least the following three items: Port IP routing troubleshootingTYPE Redistribute static When both DSAP and SSAP take a specific value of 0xff , the 802.3 frame becomes a Netware-ETHERNET frame to carry NetWare. After Port-Security is activated on the interface , the interface has certain security functions, such as limiting the maximum number of MACs of the interface (connected) , thereby limiting the access host users; or limiting the specific MAC to which the interface is connected . Thereby achieving the restriction of accessing users. Then to perform filtering or limiting actions, you need to have a basis, which is based on the secure address – secure MAC address .