ccnp switch lab workbook pdf

ccnp switch lab workbook pdf

Ip route 172.16.0.0 255.255.0.0 192.168.23.3 Remarks Ip nat inside source route-map nat1 interface serial0/0 overload ip nat inside source route-map nat2 interface serial0/1 overload ip nat inside source route-map nat3 interface serial0/1 overload bibliography Working Mechanism VTP Operating Mode : Server Maximum VLANs supported locally 1005 3.0.0.0/24 is subnetted, 1 subnets Implementation point 42 Ip address 100.0.1.1 255.255.255.0 Neighbor 1.1.1.1 update-source Loopback0 Must be zero The configured static network path is redistributed into OSPF . In this way, when the intranet user needs to access the Netcom resources, because of the details of the network access, go to OR1 . To access other resources, take the default route to OR2 . 5.5.5.5 Method two: neighbor xxx default-originate Solution 3 , so the above question is, R2 should not be to its EBGP announcement neighbor 1.1.1.0 ,ccnp switch lab workbook pdf, therefore CISCO support the use of command: Network Next hop ! Option 82 sub-option 1 is the circuit ID , which indicates the circuit identifier of the received DHCP request message. This identifier is meaningful only inside the relay agent node. The server side cannot parse its meaning, only as a meaningless one. Logo use. In general, the default is the access switch VlanID that receives the DHCP request packet and accesses the Layer 2 port name, such as Vlan2+Ethernet0/0/10 . The user can also specify its own proxy circuit ID . Usually sub-option 1 and sub-option 2 are used together to identify the information of the DHCP client.