ccnp tshoot voucher

ccnp tshoot voucher

Router bgp 345 A multiply character can be applied to a single character or multiple characters. If applied to multiple characters, put the string in (). Fa0/20 MacAddress The cost of the route. Blocking to forwarding state usually takes 30-50s (default 50S , ie 20+15+15 ), this time can also be adjusted by configuring the spanning tree timer. Example 1 : Because of this self-learning and two R1 of BGP routes NEXT_HOP property 10.1.13.1 are directly connected, is reachable, Do a test: In the above figure,ccnp tshoot voucher, R1 's fa0/0 port ip mtu is 1500 . ? 16 bits Weight 10.1.23.3 from 10.1.23.3 (3.3.3.3) 0.0.0.0 Default-information originate TCAM table 8 The next hop (the Next Hop) - if present , it identifies a better than advertised router address of the next hop address. In other words , the next hop address it noted , that in the same measure than - advertised subnet router closer to the destination. If this field is set to all 0s (0.0.0.0), the address of the advertising router is the optimal next hop address. Switch(config)# ip route 0.0.0.0 0.0.0.0 192.168.255.2 The format of the resulting file is as follows: If you want to modify the weight , let R4 go to 100.0.1.0 and go to R3 to go to 100.0.2.0 and go to R5 ? Then the configuration is modified as follows: BGP decision Therefore than MED , 2 of MED small, 2 is the best path Experiment 4 Port Manually modified. Ip mtu refers to the maximum value of the ip message. After changing the topology, the interface IP of R2 has changed. At this time , the RIP sent by R1 is updated, and the source address is still 192.168.12.1 . After receiving R2 , it finds that the interface IP that is updated with the local is not in a subnet, so R2 ignores the update message of R1 . In addition, the message sent by R2 to R1 is accepted by R1 , because R1 thinks that the RIP update message source address 192.168.12.5 sent by R2 is on the same subnet as its own interface.