ccnp tshoot final exam v7

ccnp tshoot final exam v7

To confirm, the bridge responsible for notifying the topology change will continue to send TCN BPDUs before the bridge confirms the TCN . Next, the designated bridge will generate another TCN for its own root port , and the process is sent all the way to root . Define set action SW1(config-if)# ip address 10.1.1.253 255.255.255.0 After deploying Backbone Fast , SW3 will immediately perform a series of steps to recalculate the root port as soon as it receives the suboptimal BPDU sent by SW2 . SW3 will send an RLQ request from the root port to the root bridge. Match comprising 100 and 200 of AS_PATH Often used with the portfast feature on the interface for connecting to the host Route 3 : AS_PATH : 500 For Dot1Q MTU = 1522 *> 100.0.2.0/24 Next-hop , the next-hop is changed to the update source IP of R3 , which is the loopback interface IP. R2(config)# access-list 1 deny 192.168.3.0 R2(config)# access-list 1 permit any R2(config)# router rip Router bgp 200 Match ip address 1 The two networks of network 100.0 on R1 and R2 enter BGP ,ccnp tshoot final exam v7, then the BGP table on R4 : ...... 192.168.8.0/24 3.5 RSTP (802.1W) R4#sh ip bgp For example, in the above figure, the network has two exit lines, which are connected to ISP1 and ISP2 respectively . If you want to let the intranet student users access the ISP1 line when accessing the external network , and the ISP2 line when the teacher network segment accesses the external network , This is not possible with traditional routing because traditional IP routing does not care about the source address of the data. This must be done with PBR .