ccnp route 300-101 questions and answers pdf

ccnp route 300-101 questions and answers pdf

Length of the suboption type TYPE : 1-open ; 2-update ; 3-Notification ; 4-keepalive 1 state change, last state change 00:07:24 MAC address is 0007.b400.0101 (default) Owner ID is cc00.043c.0000 Host address. *Mar 1 00:11:47.887: ICMP: redirect rcvd from 192.168.123.1- for 2.2.2.2 use gw 192.168.123.2 Will be reflected to other clients, non-clients and EBGP neighbors. In a real network environment, we may encounter a situation where there are two or more routing protocols in a network environment,ccnp route 300-101 questions and answers pdf, for example: / / This is used to delete the no-export attribute, is a list of commands Use network or redistribute manner IGP introducing route BGP when , MED will inherit IGP route Metric ( direct routes and static routes Metric is 0) Note that although R4 passes the route 400 {100 , 200} , the AS in the braces is only calculated as an AS in the AS_PATH calculation. Therefore , the two EBGP routes received on R6 have the same AS_PATH length. Finally, R6 The route of the oldest EBGP neighbor will be preferred . 4.3.2 Message Type 35 If the prefix does not match any entry in the prefix list, it will be rejected R4#sh ip bgp The following figure is the open message content of the negotiation capability parameter (note the ORF part) 10.1.13.3 Ip dhcp pool vlan10 network 192.168.10.0 /24 It is used to preferentially send packets with high priority when the switch is blocked. The configuration of R2 is added as follows: Next Hop R4#sh ip b 100.0.1.0 The time interval between consecutively transmitted BPDUs of the root bridge . Default 2S Next Hop 5.5.5.5 We restore the experimental environment to the basic configuration: BGP neighbor relationships are as follows It means for VLAN100 traffic, not to log the ARP ACL discarded packets match After the test is verified, (in the case that the basic configuration of BGP is correct) , the network segments of the looback interface of R1 and R2 are learned by static routes or dynamic routes. The establishment of BGP neighbor relationships is fine , but if both ends use the default. If the routes refer to each other, the BGP neighbor relationship cannot be established. This is for the purpose of anti-ring. When using static, the default is ok.